Interactive 2D & 3D RFID Simulation Suite

Free Online RFID Simulation Suite (2D & 3D Interactive Demos)

Experience real-world RFID physics directly in your browser. Each dedicated simulation demonstrates antenna wave excitation, sub-10ms tag telemetry, and enterprise middleware workflows.

⚡ Interactive Live Multi-Scenario Sandbox Switch Scenarios Below

Select any RFID environment tab to test live reader interrogation, calibrated speeds (0.5x, 1x, 2x), and real-time telemetry.

Multi-Dock Logistics & Trailer Dispatch

Multi-Bay Freight Truck Loading & Automated RFID Dock Portals

Warehouse crew picks cartons from high-bay stacks and loads them into freight trailers across Dock 1 & 2. As each box passes under the dock reader, it is verified. When a truck reaches 5 boxes, it departs and a new truck arrives.

00:00.00
idle
Live UHF RFID Ingest Telemetry (0 reads captured)
#Carton BoxItem SKUSGTIN-96 RFID EPCDock BayAssigned TrailerDestination Logistics HubPortal RSSILoading State
Click "Start" above to begin simulation and capture live RFID tag reads.
Architecture & Blueprints

Dedicated System Simulations & Engineering Guides

Each deep-dive page includes dedicated live simulation controls, complete hardware Bill of Materials (BOM), system topology diagrams, and ERP integration blueprints.

Vertical 06 // Freight Dispatch 🚛

Outbound Freight Trailer Loading Dock Portal Simulation

Observe warehouse loaders moving cartons across dock levelers into trailers. Four cross-polarized UHF antennas verify cartons in <15ms with live BOL reconciliation.

Key Highlights:
  • ✓ Dual Dock Bay Verification
  • ✓ Real-time Truck Capacity %
  • ✓ Automated Departure Logic
  • ✓ BOL Manifest Reconciliation
Vertical 05 // Education & Campus 🎓

Campus Walk-Through Gate Bulk Attendance Simulation

Simulate high-density morning arrivals with 45+ students streaming through campus gates in bulk. Multi-tag UHF walk-through gates capture 50+ badges/sec with automated parent SMS.

Key Highlights:
  • ✓ 45+ Student Swarm Flow
  • ✓ Zero Bottleneck Entry
  • ✓ Automated Parent SMS Alerts
  • ✓ Multi-Tag Anti-Collision
Vertical 07 // 3D RTLS Facility 🗺️

3D Isometric Warehouse RTLS & Stock Depletion Simulation

Isometric 3D warehouse with 4 pallet sections directly under ceiling RFID readers. Watch pickers carry boxes down the central highway as section stock deducts live.

Key Highlights:
  • ✓ Phased Array Overhead Beams
  • ✓ Live Stock Balance Counters
  • ✓ Aisle Transit Directionality
  • ✓ Central Dispatch Verification
Vertical 01 // Sports Timing 🏃

Marathon Race Timing with Ground Mats Simulation

Simulate road race timing with runners crossing dual-channel rubber timing mats. Calculate sub-millisecond chip time vs gun time with live leaderboard updates.

Key Highlights:
  • ✓ Dual Ground Timing Mats
  • ✓ Chip vs Gun Time Precision
  • ✓ Bib Tag Foam Air Gaps
  • ✓ Instant Leaderboard Publishing
Vertical 02 // WMS Pallet Ingest 📦

Forklift Pallet Dock Door Ingest Simulation

Industrial forklift carrying full pallets through a 4-port UHF dock portal. Reads and verifies 24+ carton tags in under 0.4 seconds with instant SAP/Tally sync.

Key Highlights:
  • ✓ 24-Carton Simultaneous Ingest
  • ✓ Directional Photo-Eyes
  • ✓ SAP/Tally PO Verification
  • ✓ Red/Green Stack Light Alerts
Vertical 04 // Vehicle Access 🚗

Automated FASTag Parking Barrier Simulation

Long-range UHF reader detects vehicle windshield FASTags at 6 meters, triggering green traffic signals and raising the servo boom barrier in 1.2 seconds.

Key Highlights:
  • ✓ 6m Long-Range Windshield Detection
  • ✓ 1.2s BLDC Barrier Motor
  • ✓ Dual Induction Loop Interlocks
  • ✓ Anti-Tailgating Architecture
Vertical 03 // Circuit Motorsport 🏎️

Motorsport Transponder Finish Gantry Simulation

Overhead steel gantry antennas track race karts crossing the finish line at 120+ km/h with split-second trap speed and millisecond lap timing logs.

Key Highlights:
  • ✓ 120+ km/h Trap Speed Capture
  • ✓ Overhead Truss Gantry Setup
  • ✓ ±0.001s Lap Timing Precision
  • ✓ OBS & LED Leaderboard Feeds
Vertical 07 // Apparel & Boutiques 🛍️

Retail Garment Store Handheld RFID Inventory Audit Simulation

A single retail associate walks the sales floor with an RFID wand, scanning 450+ hung garments and display tables in seconds while 3 other staff manage the sales floor and POS register.

Key Highlights:
  • ✓ 4 Store Associates Modeled
  • ✓ Dynamic Handheld RF Cone
  • ✓ 450+ Tagged Garments Audited
  • ✓ Real-time POS/ERP Sync HUD
Vertical 08 // Emergency Mustering 🚨

Industrial Smart Emergency Mustering & RFID Headcount Portal Simulation

Outdoor 4-antenna portal archway powered by a Zebra FX9600 reader captures evacuating industrial workers at 100+ tags/sec with on-site SKULLSAINTS Onyx Quad-NIC IPC Still Inside triage.

Key Highlights:
  • ✓ 4-Antenna Outdoor Portal Arch
  • ✓ Zebra FX9600 Multi-Tag Ingest
  • ✓ SKULLSAINTS Quad-NIC Offline IPC
  • ✓ Critical Still-Inside Triage HUD
Frequently Asked Questions

RFID Simulation Suite Architecture & Telemetry

Details regarding empirical UHF physics, ERP integration hooks, and open-source testing tools.

How do the in-browser 2D & 3D RFID simulations work without physical hardware?
Each simulation runs an in-browser physics and RF propagation model mimicking enterprise UHF Gen2 readers (such as Impinj Speedway and Zebra FX9600). The models simulate realistic tag detection, antenna radiation lobes, polarization loss, multi-tag anti-collision algorithms, and live ERP/WMS telemetry directly in your browser.
Can I connect these simulation models to real middleware or ERP systems?
Yes. The OpenRFID middleware and edge SDKs accept synthetic tag events over Fastify REST, WebSockets, and MQTT, bridging synthetic hardware states directly to SAP S/4HANA BAPIs, Tally Prime XML vouchers, and custom warehouse management systems.
What hardware scenarios are currently simulated in this showcase?
The showcase features 9 complete enterprise scenarios: 4-Port Warehouse Dock Door Ingest, Outbound Freight Trailer Loading, 3D Isometric Warehouse RTLS Zones, Campus Walk-Through Attendance Gates, Marathon & Road Race Ground Mat Timing, FASTag High-Speed Parking Barrier Gates, Industrial Emergency Mustering Triage, Retail Garment Store Wand Auditing, and Motorsport High-Speed Lap Timing Gantries.
Are these simulation models free to test and open-source?
Yes, all 9 simulations are 100% free to interact with directly in the browser. The underlying protocol libraries, LLRP parsers, and reader emulators are distributed under the permissive MIT open-source license via the OpenRFID GitHub repository.
How accurate is the RF telemetry (RSSI, read rates, and read window duration)?
The simulations incorporate empirical UHF physics curves at 865–867 MHz (ETSI/India WPC) and 902–928 MHz (FCC), modeling Gaussian RSSI attenuation (-35 dBm near-field to -80 dBm threshold), tag backscatter velocity, and multipath packet dropouts for realistic test conditions.

Ready to Connect Physical Hardware to Cloud Middleware?

OpenRFID Cloud Middleware connects Zebra, Impinj, Chainway, and Hopeland readers directly to SAP, Tally Prime, and custom WMS platforms with zero code.

Hi, Can I Help ? 💬
AI