Video Demonstration · Industrial RFID

Horizontal Orientation Testing: On-Metal RFID Tags Between Metal Sheets Demo

Evaluating Multipath RF Reflection and Near-Field Coupling Inside Metal Stacks

Live walkthrough & hardware operation testing. For itemized pricing, technical datasheets, and bulk procurement, view the official Horizontal Orientation Testing: On-Metal RFID Tags Between Metal Sheets product catalog page.

About this Video Demonstration

RF Stress Benchmark: Horizontal On-Metal Tag Testing Between ACP Metal Sheets This laboratory stress benchmark investigates the read capability of UHF On-Metal RFID Tags Placed Horizontally Between Dense ACP Sheets. When heavy aluminum sheets are stacked horizontally on factory skids, the narrow gap between metal layers acts as an RF waveguide. This test measures signal penetration and singulation under worst-case metallic attenuation. 1. Waveguide Effect & Handheld Reader Interrogation • Near-Field Wave Penetration: Testing horizontal beam incidence from a handheld Chainway C72 terminal at varying angles. • Multipath Signal Recovery: Evaluating how our edge middleware decodes reflected pulses without missing tags buried inside the skid.

Key System Capabilities & Features

✓ Stress test evaluating horizontal tag reading inside tightly compressed ACP panel stacks
✓ Measures RF wave attenuation and waveguide propagation through narrow 3mm metallic gaps
✓ Demonstrates Chainway C72 mobile terminal read reliability at 1 to 3 meters standoff distance
✓ Proves 100% inventory capture without unstacking or manually separating heavy metal sheets
✓ Validates anti-metal dielectric foam performance under intense mechanical stacking pressure
✓ Essential reference data for metal fabrication plants, cladding distributors, and facade warehouses

Looking for Complete Technical Specifications & Datasheets?

Detailed dimensions, electrical ratings, read range benchmarks, and RF compatibility are available on the official hardware datasheet.

View Datasheet & Specs

RFID Deployment Sizing & Engineering Tools

Validate link budget, tag selection, and hardware compatibility for this equipment setup:

Link Budget Tool → Read Range Calculator Estimate UHF range by reader EIRP & tag sensitivity Inlay Matching Tool → Tag Selection Wizard Filter on-metal, apparel, and windshield tags ROI & BOM Tool → Tag Cost Calculator Calculate total tag volume procurement cost

Frequently Asked Questions

Can tags be read if they are deep inside a stack of 50 metal sheets? ▼

When tags are placed at the panel perimeter (flagged or mounted on edge borders), the reader singulates every panel in seconds. Tags buried in the dead center of a solid metal sandwich require perimeter placement for 100% RF line-of-sight.

How does horizontal tag orientation affect read range when mounted parallel to sheet edges? ▼

Horizontal orientation aligns the tag's dipole antenna with the panel edge ground plane, creating an extended capacitive coupling effect that can increase read range by up to 25% when illuminated by circular polarized readers.

What read distances are achieved during horizontal ACP sheet testing? ▼

In our controlled warehouse tests, premium ceramic and FR4 on-metal tags oriented horizontally achieved 4.8 to 6.2 meters read range with a fixed 30 dBm dock portal antenna.

Does horizontal placement withstand pallet banding and forklift strapping? ▼

Yes, provided the tag is mounted in the recessed indentation or edge channel where nylon/steel strapping does not crush or abrade the tag casing during transport.

View Full Product Specs & Pricing Request Custom Integration Quote